Anti-intrusion control unit Fracarro DEFENDER 8

Fracarro Defender 8 wired intrusion control unit, with 4 lines on board, expandable to 8 lines

Control unit with accessories entirely on bus, remotely manageable, for 4-line intrusion detection systems expandable to 8 , freely programmable. It is suitable for small intrusion detection systems such as: studio/two-room apartments, apartments, small shops. They are equipped with integrated control buttons and LEDs. The Defender 12 control unit can be managed using electronic keys with RFID technology and a T8N keyboard with LCD display . Easy and versatile to configure thanks to the possibility of programming it in different ways: via internal dip-switches, buttons on the control unit, T8N keyboard or PC (via the optional MOD-USB card). The control unit allows you to directly house PSTN and GSM telephone dialers on bus inside it and is able to divide the lines into 4 partitions.

MAIN FEATURES

• Possibility to expand the control panel lines via the 4-input M4IBUS module
• Integrated software filter for fast alarm detection (for vibration or wire sensors)
• Possibility to save up to 4 system configurations on memory key
• 6 exits in central
• Up to 4 programmable partitions
• Up to 8 T8N remote keypads connectable for total/partial management and arming of the system
• Programming via dip-switch; on-board buttons
• Programming and management can also be carried out from a PC (locally or remotely) via the Defender SW
• 200 event memory with date/time/user/event indication, displayed with the set name for better traceability
• Partialization also via electronic key with RFID technology (up to 8 inserters for a total of 64 keys)

HOW DOES A Fracarro Defender ALARM CONTROL UNIT WORK?

The Defender Fracarro control units are equipped with various terminal blocks inside to which the physical lines for connecting the sensors can be connected. The number of lines can vary from control unit to control unit and for each line you can connect multiple sensors, even of different types, in order to increase the level of control inside the building. For example, to line no. 1 you can connect the door/window opening sensors and the volumetric sensor of the ground floor, or of the garage only. The Defender control unit has a BUS data channel as standard to which you can connect various intelligent devices that allow two-way communication . For example, you can connect the T8N keypad which, in addition to giving commands to the control unit in order to control it, will be able to receive information to monitor its status, for example it will be able to display the status of the system (armed, partially, tampering attempts) and, in the event of an alarm, it will be able to display the line that generated it .

Installation example of the Fracarro Defender 12/DT Kit: the door/window opening sensors and the volumetric sensors are connected to the relevant input lines. The T8N keyboard, the CHBUS transponder inserter and the M4IBUS additional board, on the other hand, are connected to the 485 data BUS

WHAT CAN I CONNECT TO A Fracarro Defender ALARM CONTROL UNIT?

Defender control units can be used easily to monitor the state of your home throughout the day. When you are away from home, it will perform the Anti-Intrusion function, activating all lines and reporting any intrusions via an external siren, internal sirens and with a phone call via a telephone dialer. When you are at home, the partialization will allow you to activate only some lines, for example the lines relating to the door/window opening sensors (perimeter): a useful function at night when you want to activate the anti-intrusion control by excluding the internal sensors, thus allowing you to move freely around the house without activating the alarm. In both cases, it is possible to create 24h lines, i.e. constantly activated lines to which smoke or flood sensors can be connected, which must be constantly monitored by the control unit.

OTHER FEATURES

• Management of technological alarms (with reset function for smoke and gas sensors)
• Bus length up to 1500 m
• Line termination can be set individually as single balance, double balance, NC or NO
• Walk test function
• Self-protected against opening
• Anti-tear tamper option (optional)
• Sensor power supply active even when the system is off
• Dedicated circuit for external battery charging
• Self-protection lock for maintenance with a maximum time of 30 minutes
• Timed control unit block in case of entering a false code
• Programmable entry/exit time from 0 to 255 seconds
• System self-diagnosis with indication of any faults on display and PC
• Ability to individually name all inputs, outputs, zones, codes, electronic keys, keyboards
• 6 programmable outputs on the control unit: 2 voltage outputs (positive and negative for sirens), 1 relay output managed by a single command; 5 Open Collectors (50 mA) configured by default but freely programmable
• Ability to associate user keys
• 2 access levels: Installer/User
• Lines configurable as: alarm/ emergency/ anti-robbery/ delayed/ exit termination/ bell/ 24H alarm
• LED indication: activation/deactivation; presence of electricity network; tamper alarm; system failure; alarm
• Power supply with 1 A capacity
• Configurable built-in buzzer

Codes: 680DEFENDER8, DEFENDER8, DEFENDER 8, 910301

Fracarro Code: 910301