Voltage stabilizer 500VA, 220VAC Single phase Kert TREK500 P

220VAC Single Phase Voltage Stabilizer, Power 500VA Kert TREK500P

Voltage stabilizers are tools capable of guaranteeing the supply of a stable voltage independent of variations in the distribution network. They are the ideal device in order to prevent potential damage due to fluctuation of the input voltage. The voltage supplied by the utility company (for example Enel) can deviate from the rated voltage, even by ± 30%.

The voltage stabilizers are designed to be interposed between the power supply network and the devices that could suffer from variations, with the aim of stabilizing the voltage, improving its quality and protecting the loads from network discharges.

Specifications

• Power (W): 5 00
• Input voltage range (Vac): 180 ÷ 270
• Input frequency (Hz): 50
• Output voltage (Vac): 225 ± 5%
• Output frequency (Hz): 50
• Response time (ms): 20
• Load Power Factor: Any
• Efficiency (%): > 95%
• 110% overload: -
• 150% overload: 2 min.
• Harmonic distortion (% THD): <3
• Electronic overload protection: on
• Input protection fuse: on
• Varistor input protection: on
• Cooling: natural
• Fan operation mode: -
• Input connections: Schuko plug (cable 110 cm)
• Connections Output: Schuko socket
• Acoustic signals: -
• LED signals: Overload, Overtemperature, Output present, Autotest
• Information on the display: -
• IP protection degree: IP20
• Operating temperature (° C): -20 ... +50
• Relative humidity (not condensed) (%): 5 ÷ 95
• Installation: Tabletop (desktop)
• Standards: EN 55022. EN 61000-4-11, EN 61000-4-4, EN 61000-4-2, EN 60950-1, EN 61000-3-2, EN 61000-3-3
• Width (mm): 175 , 00
• Height (mm): 96 , 00
• Depth (mm): 126 , 00
• Weight (kg): 2.6 0