NEXT NM2BTS15 Electric tape 2x1,5mm2 per meter

NEXT TAPE NM2BT15 Tape 2x1,5mm2 per meter

The NEXT tape is composed of 2 tracks of 1.5 mm2 of copper for a total width of 50 mm. It can be used for lighting, audio and power supply installations. The positioning must be done on a clean and dry wall. At the end NEXT must be covered with water-based paint or smoothing and protected according to the National Regulations in force in the country of installation.

	Adhesive It is installed directly on the surface of walls or ceilings thanks to the very high resistance and tenacity glue (3.2 N / cm).
Flexible It can be twisted and flattened for any change of direction.
	Thin Just 0.25 mm thick: invisible after painting or shaving!
Paintable It can be easily covered with stucco or a covering such as wallpaper or simple painting. Alternatively it can be placed behind the skirting board or even under floors and carpets.

Technical features

• Equivalent section: 1,5 mmq
• Number of routes: 2
• Storage and transport temperature: -10 ° C… + 50 ° C
• Ambient temperature during installation: + 5 ° C… + 55 ° C
• Maximum relative humidity @ Tamb = + 25 ° C: 100%
• Maximum relative humidity @ Tamb = + 20 ° C: 95%
• Maximum operating altitude: 5.000m
• Rated insulation voltage, Ui: 1,500V AC
• Rated impulse withstand voltage: 4.000V
• Max current density: 10A / mm2

Installation example