Piergiacomi PN2005 Long Caliper with Knurled Tip Blades
Weller SD8SET Kit of 8 slotted, Phillips, Pozidriv and voltage tester screwdrivers with 1000V insulation
Weller/Crescent screwdriver set with cross recess and with network tester. Includes: PH1x100, PH2x100, PZ1x100, PZ2x100, Taglio 2,5x80, 4x100, 6,5x150 and phase tester 140.
Product code: B008B5BS1Q, SD8SET, 4003019117222
Professional Automatic Wire Stripper PTS4
The PTS4 is suitable for stripping single flexible electric cables from 0.2 to 6 mm2 in section. For the external sheaths of single or multipolar cables, it is possible to vary the pressure of the blades using the adjustment. The stripping length of the cable is adjustable up to 20mm. The stripping of the insulation takes place without the conductor being damaged.
Product Codes: PTS4, 2000000184630
Piergiacomi PN2005 Long Caliper with Knurled Tip Blades
Piergiacomi TR20M Lightweight Cutie Trimming
Pneumatic machine for cutting loose components Piergiacomi MMP10
The MMP-10 is a pneumatic machine for cutting loose components (transistors, LEDs, capacitors, resistor, etc.). The standard cutting height is 3mm, but it can be varied by adding the supplied matte (height 1.5mm). The diameter of the components that the machine can cut varies from 0.3 to 1.3mm for a maximum number of 60 legs. Component cutting capacity / hour: 3000
Pneumatic machine for cutting loose components Piergiacomi MMP10
The MMP-10 is a pneumatic machine for cutting loose components (transistors, LEDs, capacitors, resistor, etc.). The standard cutting height is 3mm, but it can be varied by adding the supplied matte (height 1.5mm). The diameter of the components that the machine can cut varies from 0.3 to 1.3mm for a maximum number of 60 legs. Component cutting capacity / hour: 3000
