Fluke s..110.pdf
(528.99 KB)
Fluke 115 Digital Multimeter TRMS 600V 10A
Product Code: 560115
Inventory Status:
on order
| Quantity | Price | VAT excluded | VAT included |
|---|---|---|---|
| 1 | Default | €279.00 | €340.38 |
* During the order confirmation phase, the prices including VAT will be rounded to the second decimal place according to with current legislation
TRMS Fluke 115 Digital Multimeter
The 110 Series consists of five true-RMS digital multimeters, each designed for specific needs. These compact instruments can be used with one hand and are equipped with a backlit display with large digits for immediate reading.
The 115 model, ideal for everyday use, is a multimeter optimized for electrical and electronic tests during field service, for industrial use and for ordinary applications where a greater number of functions are required than the basic ones.
FLUKE FEATURES 115
|  |
 |  |
FLUKE SPECIFICATIONS 115
| FUNCTION | MAXIMUM | RESOLUTION | PRECISION |
| DC voltage | 600 V | 1 mV | ± (0.5% + 2) |
| AC voltage | 600 V | 1 mV | ± (1.0% + 3) |
| DC current | 10 A | 1 mA | ± (1.0% + 3) |
| AC current | 10 A | 0.01 A | ± (1.5% + 3) |
| Resistence | 40MΩ | 0.1Ω | ± (0.9% + 1) |
| Capacity | 10000μF | 1 nF | ± (1.9% + 2) |
| Frequency | 50 KHz | 0.01 Hz | ± (0.1% + 2) |
(Full specifications in the attached datasheet)
- Battery type: 9 V alkaline, typical life 400 hours
- Dimensions (HxWxD): 167mm x 84mm x 46mm
- Weight: 0.55kg (including batteries)
- Warranty: 3 years
SUPPLIED
- Tips with 4 mm spring terminals and protected tip
- Shell
- 9V battery installed
- User manual
COMPARISON BETWEEN THE 110 SERIES MODELS
113 | 114 | 115 | 116 | 117 | |
| True RMS measurements | B.C | B.C | B.C | B.C | B.C |
| Resolution (n. Points) | 6000 | 6000 | 6000 | 6000 | 6000 |
| Backlight | ● | ● | ● | ● | ● |
| Analog histogram | ● | ● | ● | ● | ● |
| AutoVolt: automatic selection of AC / DC voltage | ● | ● | ● | ||
| VoltAlert: Non-contact voltage detection | ● | ||||
| Built-in thermometer for HVAC applications | ● | ||||
| LoZ: low input impedance for the prevention of parasitic voltages | ● | ● | ● | ||
| VCHECK LoZ: low impedance to measure voltage or continuity simultaneously | ● | ||||
| Min / Max / Average functions to record signal fluctuations | ● | ● | ● | ● | ● |
| Resistance, continuity | ● | ● | ● | ● | ● |
| Frequency, capacitance and diodes | - / ● / ● | ● | ● | ● | |
| MicroAmpere measurement for flame sensors | ● | ||||
| "Display Hold" function | ● | ● | ● | ● | ● |
| Automatic and manual range selection | ● | ● | ● | ● | ● |
| Low battery indication | ● | ● | ● | ● | ● |
| Removable shell | ● | ● | ● | ● | ● |
